• Current rules
    • UWA Design School
      • Graduate Certificate in Architectural Conservation (25240)
        Applicability of the Student Rules, policies and procedures

        1.(1) The Student Rules apply to students in this course.

        (2) The policy, policy statements and guidance documents and student procedures apply, except as otherwise indicated in the rules for this course.

        Academic Conduct Essentials and Communication and Research Skills modules

        2.(1) Except as stated in (2), a student who enrols in this course for the first time irrespective of whether they have previously been enrolled in another course of the University, must undertake the Academic Conduct Essentials module (the ACE module) and the Communication and Research Skills module (the CARS module).

        (2) A student who has previously achieved a result of Ungraded Pass (UP) for the CARS module is not required to repeat the module.

        (3) A student must successfully complete the ACE module within the first teaching period of their enrolment. Failure to complete the module within this timeframe will result in the student's unit results from this teaching period being withheld. These results will continue to be withheld until students avail themselves of a subsequent opportunity to achieve a passing grade in the ACE module. In the event that students complete units in subsequent teaching periods without completing the ACE module, these results will similarly be withheld. Students will not be permitted to submit late review or appeal applications regarding results which have been withheld for this reason and which they were unable to access in the normally permitted review period.

        English Language competency requirements

        3. To be considered eligible for consideration for admission to this course an applicant must satisfy the University's English language competence requirement as set out in the University Policy on Admission: Coursework.

        Admission requirements

        4.(1) To be considered for admission to this course an applicant must have—

        (a) a Bachelor's degree, or an equivalent qualification, as recognised by UWA;

        and

        (b) the equivalent of a UWA weighted average mark of at least 50 per cent;

        and

        (c) successfully completed prior study in a field relevant to Architectural Conservation; or

        (2) significant work experience including at least 5 years with a material level of responsibility.

        Admission ranking and selection

        5. Where relevant, admission will be awarded to the highest ranked applicants or applicants selected based on the relevant requirements.

        Articulations and exit awards

        6. This course does not form part of an articulated sequence.

        Course structure

        7.(1) The course consists of units to a total value of 24 points.

        (2) Units must be selected in accordance with the course structure, as set out in these rules.

        Satisfactory progress

        8. To make satisfactory progress in a calendar year a student must pass units to a value of at least half the total value of units in which they remain enrolled after the final date for withdrawal without academic penalty.

        9. A student who has not achieved a result of Ungraded Pass (UP) for the Communication and Research Skills module (the CARS module) when their progress status is assessed will not have made satisfactory progress even if they have met the other requirements for satisfactory progress in Rule 8.

        Progress status

        10.

        (a) A student who fails to make satisfactory progress in terms of Rule 8 for the first time is assigned the progress status of ‘Suspended' by the Faculty.

        (b) A student who fails to make satisfactory progress in terms of Rule 8 for a second time is assigned the progress status of ‘Excluded' by the Faculty.

        11. A student who does not make satisfactory progress in terms of Rule 9 is assigned the progress status of 'On Probation', unless they have been assigned a progress status of 'Suspended' or 'Excluded' for failure to meet other satisfactory progress requirements in Rule 8.

        Award with distinction

        12. This rule is not applicable to this course.

        Deferrals

        13. Applicants awarded admission to the course are entitled to a deferral of up to 12 months, as per the University Policy on: Admissions (Coursework).

      • Graduate Certificate in Urban Design (25210)
        Applicability of the Student Rules, policies and procedures

        1.(1) The Student Rules apply to students in this course.

        (2) The policy, policy statements and guidance documents and student procedures apply, except as otherwise indicated in the rules for this course.

        Academic Conduct Essentials and Communication and Research Skills modules

        2.(1) Except as stated in (2), a student who enrols in this course for the first time irrespective of whether they have previously been enrolled in another course of the University, must undertake the Academic Conduct Essentials module (the ACE module) and the Communication and Research Skills module (the CARS module).

        (2) A student who has previously achieved a result of Ungraded Pass (UP) for the CARS module is not required to repeat the module.

        (3) A student must successfully complete the ACE module within the first teaching period of their enrolment. Failure to complete the module within this timeframe will result in the student's unit results from this teaching period being withheld. These results will continue to be withheld until students avail themselves of a subsequent opportunity to achieve a passing grade in the ACE module. In the event that students complete units in subsequent teaching periods without completing the ACE module, these results will similarly be withheld. Students will not be permitted to submit late review or appeal applications regarding results which have been withheld for this reason and which they were unable to access in the normally permitted review period.

        English Language competency requirements

        3. To be considered eligible for consideration for admission to this course an applicant must satisfy the University's English language competence requirement as set out in the University Policy on Admission: Coursework.

        Admission requirements

        4.(1) To be considered for admission to this course an applicant must have—

        (a) a Bachelor's degree, or an equivalent qualification, as recognised by UWA;

        and

        (b) the equivalent of a UWA weighted average mark of at least 50 per cent;

        and

        (c) successfully completed prior study in a field relevant to Urban Design; or

        (2) Significant work experience including at least 5 years with a material level of responsibility.

        Admission ranking and selection

        5. Where relevant, admission will be awarded to the highest ranked applicants or applicants selected based on the relevant requirements.

        Articulations and exit awards

        6. The following courses form part of an articulated sequence:

        • 25210 Graduate Certificate in Urban Design (24 points)
        • 25310 Graduate Diploma in Urban Design (48 points)
        • 25530 Master of Urban Design (96 points)
        Course structure

        7.(1) The course consists of units to a total value of 24 points.

        (2) Units must be selected in accordance with the course structure, as set out in these rules.

        Satisfactory progress

        8. To make satisfactory progress a student must pass units to a point value greater than half the total value of units in which they remain enrolled after the final date for withdrawal without academic penalty.

        9. A student who has not achieved a result of Ungraded Pass (UP) for the Communication and Research Skills module (the CARS module) when their progress status is assessed will not have made satisfactory progress even if they have met the other requirements for satisfactory progress in Rule 8.

        Progress status

        10.(1) Students who fail to make satisfactory progress under Rule 8 for the first time are assigned the progress status of 'Suspended' by the Faculty.

        (2) Students who fail to make satisfactory progress under Rule 8 for a second time are assigned the progress status of 'Excluded' by the Faculty.

        11. A student who does not make satisfactory progress in terms of Rule 9 is assigned the progress status of 'On Probation', unless they have been assigned a progress status of 'Suspended' or 'Excluded' for failure to meet other satisfactory progress requirements in Rule 8.

        Award with distinction

        12. This rule is not applicable to this course.

        Deferrals

        13. Applicants awarded admission to the course are entitled to a deferral of up to 12 months, as per the University Policy on: Admissions (Coursework).

        Additional rules
        Restriction on enrolment

        14. A student must not enrol in URBD5804 Urban Design Studio 1 and URBD5802 Urban Design Studio 2 in the same semester.

      • Graduate Certificate in Urban Design (online) (25250) Only available to re-enrolling students.

        Note: This course is only available to re-enrolling students.

        Applicability of the Student Rules, policies and procedures

        1.(1) The Student Rules apply to students in this course.

        (2) The policy, policy statements and guidance documents and student procedures apply, except as otherwise indicated in the rules for this course.

        Academic Conduct Essentials and Communication and Research Skills modules

        2.(1) Except as stated in (2), a student who enrols in this course for the first time irrespective of whether they have previously been enrolled in another course of the University, must undertake the Academic Conduct Essentials module (the ACE module).

        (2) A student who has previously achieved a result of Ungraded Pass (UP) for the ACE module is not required to repeat the module.

        English Language competency requirements

        3. To be considered eligible for consideration for admission to this course an applicant must satisfy the University's English language competence requirement as set out in the University Policy on Admission: Coursework.

        Admission requirements

        4.(1) To be considered for admission to this course an applicant must have—1) To be considered for admission to this course an applicant must have—

        (a) a Bachelor's degree, or an equivalent qualification, as recognised by UWA;

        and

        (b) the equivalent of a UWA weighted average mark of at least 50 per cent;

        and

        (c) successfully completed prior study in a field relevant to Urban Design; or

        (2) Significant work experience including at least 5 years with a material level of responsibility.

        Admission ranking and selection

        5. Where relevant, admission will be awarded to the highest ranked applicants or applicants selected based on the relevant requirements.

        Articulations and exit awards

        6. The following courses form part of an articulated sequence:

        • 25250 Graduate Certificate in Urban Design (online) (24 points)
        • 25310 Graduate Diploma in Urban Design (48 points)
        • 25530 Master of Urban Design (96 points)
        Course structure

        7.(1) The course consists of units to a total value of 24 points.

        (2) Units must be selected in accordance with the course structure, as set out in these rules.

        Satisfactory progress

        8. To make satisfactory progress a student must pass units to a point value greater than half the total value of units in which they remain enrolled after the final date for withdrawal without academic penalty.

        9. A student who has not achieved a result of Ungraded Pass (UP) for the Communication and Research Skills module (the CARS module) when their progress status is assessed will not have made satisfactory progress even if they have met the other requirements for satisfactory progress in Rule 8.

        Progress status

        10.(1) Students who fail to make satisfactory progress under Rule 8 for the first time are assigned the progress status of 'Suspended' by the Faculty.

        (2) Students who fail to make satisfactory progress under Rule 8 for a second time are assigned the progress status of 'Excluded' by the Faculty.

        11. A student who does not make satisfactory progress in terms of Rule 9 is assigned the progress status of 'On Probation', unless they have been assigned a progress status of 'Suspended' or 'Excluded' for failure to meet other satisfactory progress requirements in Rule 8.

        Award with distinction

        12. This rule is not applicable to this course.

        Deferrals

        13. Applicants awarded admission to the course are entitled to a deferral of up to 12 months, as per the University Policy on: Admissions (Coursework).

        Additional rules
        Restriction on enrolment

        14. A student must not enrol in URBD5804 Urban Design Studio 1 and URBD5802 Urban Design Studio 2 in the same semester.

      • Graduate Diploma in Building Information Modelling (25340)
        Applicability of the Student Rules, policies and procedures

        1.(1) The Student Rules apply to students in this course.

        (2) The policy, policy statements and guidance documents and student procedures apply, except as otherwise indicated in the rules for this course.

        Academic Conduct Essentials and Communication and Research Skills modules

        2.(1) Except as stated in (2), a student who enrols in this course for the first time irrespective of whether they have previously been enrolled in another course of the University, must undertake the Academic Conduct Essentials module (the ACE module).

        (2) A student who has previously achieved a result of Ungraded Pass (UP) for the ACE module is not required to repeat the module.

        English Language competency requirements

        3. To be considered eligible for consideration for admission to this course an applicant must satisfy the University's English language competence requirement as set out in the University Policy on Admission: Coursework.

        Admission requirements

        4.(1) To be considered for admission to this course an applicant must have—

        (a) a Bachelor's degree, or an equivalent qualification, as recognised by UWA;

        and

        (b) the equivalent of a UWA weighted average mark of at least 50 per cent;

        and

        (c) at least two years professional experience in a relevant occupation;

        and

        (d) successfully completed prior study in a field relevant to Building Information Modelling; or

        (2) significant work experience including at least 5 years with a material level of responsibility.

        Admission ranking and selection

        5. Where relevant, admission will be awarded to the highest ranked applicants or applicants selected based on the relevant requirements.

        Articulations and exit awards

        6. The following courses form part of an articulated sequence:

        • 25340 Graduate Diploma in Building Information Modelling (24 points)
        • 25540 Master of Building Information Modelling (48 points)
        • 25560 Master of Building Information Modelling (Online) (48 points)
        Course structure

        7.(1) The course consists of units to a total value of 24 points.

        (2) Units must be selected in accordance with the course structure, as set out in these rules.

        Satisfactory progress

        8. To make satisfactory progress a student must pass units to a point value greater than half the total value of units in which they remain enrolled after the final date for withdrawal without academic penalty.

        9. A student who has not achieved a result of Ungraded Pass (UP) for the Communication and Research Skills module (the CARS module) when their progress status is assessed will not have made satisfactory progress even if they have met the other requirements for satisfactory progress in Rule 8.

        Progress status

        10.(1) A student who makes satisfactory progress is assigned the status of 'Good Standing'.

        (2) Unless the relevant board determines otherwise because of exceptional circumstances—

        (a) a student who does not make satisfactory progress for the first time under Rule 8 is assigned a progress status of 'On Probation';

        (b) a student who does not make satisfactory progress for the second time under Rule 8 is assigned a progress status of 'Suspended';

        (c) a student who does not make satisfactory progress for the third time under Rule 8 is assigned a progress status of 'Excluded'

        11. A student who does not make satisfactory progress in terms of Rule 9 is assigned the progress status of 'On Probation', unless they have been assigned a progress status of 'Suspended' or 'Excluded' for failure to meet other satisfactory progress requirements in Rule 8.

        Award with distinction

        12. This rule is not applicable to this course.

        Deferrals

        13. Applicants awarded admission to the course are entitled to a deferral of up to 12 months, as per the University Policy on: Admissions (Coursework).

      • Graduate Diploma in Building Information Modelling (Online) (25360)
        Applicability of the Student Rules, policies and procedures

        1.(1) The Student Rules apply to students in this course.

        (2) The policy, policy statements and guidance documents and student procedures apply, except as otherwise indicated in the rules for this course.

        Academic Conduct Essentials and Communication and Research Skills modules

        2.(1) Except as stated in (2), a student who enrols in this course for the first time irrespective of whether they have previously been enrolled in another course of the University, must undertake the Academic Conduct Essentials module (the ACE module).

        (2) A student who has previously achieved a result of Ungraded Pass (UP) for the ACE module is not required to repeat the module.

        English Language competency requirements

        3. To be considered eligible for consideration for admission to this course an applicant must satisfy the University's English language competence requirement as set out in the University Policy on Admission: Coursework.

        Admission requirements

        4.(1) To be considered for admission to this course an applicant must have—

        (a) a Bachelor's degree, or an equivalent qualification, as recognised by UWA;

        and

        (b) the equivalent of a UWA weighted average mark of at least 50 per cent;

        and

        (c) at least two years professional experience in a relevant occupation;

        and

        (d) successfully completed prior study in a field relevant to Building Information Modelling; or

        (2) significant work experience including at least 5 years with a material level of responsibility.

        Admission ranking and selection

        5. Where relevant, admission will be awarded to the highest ranked applicants or applicants selected based on the relevant requirements.

        Articulations and exit awards

        6. The following courses form part of an articulated sequence:

        • 25360 Graduate Diploma in Building Information Modelling (Online) (24 points)
        • 25540 Master of Building Information Modelling (48 points)
        • 25560 Master of Building Information Modelling (Online) (48 points)
        Course structure

        7.(1) The course consists of units to a total value of 24 points.

        (2) Units must be selected in accordance with the course structure, as set out in these rules.

        Satisfactory progress

        8. To make satisfactory progress a student must pass units to a point value greater than half the total value of units in which they remain enrolled after the final date for withdrawal without academic penalty.

        9. A student who has not achieved a result of Ungraded Pass (UP) for the Communication and Research Skills module (the CARS module) when their progress status is assessed will not have made satisfactory progress even if they have met the other requirements for satisfactory progress in Rule 8.

        Progress status

        10.(1) A student who makes satisfactory progress is assigned the status of 'Good Standing'.

        (2) Unless the relevant board determines otherwise because of exceptional circumstances—

        (a) a student who does not make satisfactory progress for the first time under Rule 8 is assigned a progress status of 'On Probation';

        (b) a student who does not make satisfactory progress for the second time under Rule 8 is assigned a progress status of 'Suspended';

        (c) a student who does not make satisfactory progress for the third time under Rule 8 is assigned a progress status of 'Excluded'

        11. A student who does not make satisfactory progress in terms of Rule 9 is assigned the progress status of 'On Probation', unless they have been assigned a progress status of 'Suspended' or 'Excluded' for failure to meet other satisfactory progress requirements in Rule 8.

        Award with distinction

        12. This rule is not applicable to this course.

        Deferrals

        13. Applicants awarded admission to the course are entitled to a deferral of up to 12 months, as per the University Policy on: Admissions (Coursework).

      • Graduate Diploma in Urban Design (25310)
        Applicability of the Student Rules, policies and procedures

        1.(1) The Student Rules apply to students in this course.

        (2) The policy, policy statements and guidance documents and student procedures apply, except as otherwise indicated in the rules for this course.

        Academic Conduct Essentials and Communication and Research Skills modules

        2.(1) Except as stated in (2), a student who enrols in this course for the first time irrespective of whether they have previously been enrolled in another course of the University, must undertake the Academic Conduct Essentials module (the ACE module) and the Communication and Research Skills module (the CARS module).

        (2) A student who has previously achieved a result of Ungraded Pass (UP) for the CARS module is not required to repeat the module.

        (3) A student must successfully complete the ACE module within the first teaching period of their enrolment. Failure to complete the module within this timeframe will result in the student's unit results from this teaching period being withheld. These results will continue to be withheld until students avail themselves of a subsequent opportunity to achieve a passing grade in the ACE module. In the event that students complete units in subsequent teaching periods without completing the ACE module, these results will similarly be withheld. Students will not be permitted to submit late review or appeal applications regarding results which have been withheld for this reason and which they were unable to access in the normally permitted review period.

        English Language competency requirements

        3. To be considered eligible for consideration for admission to this course an applicant must satisfy the University's English language competence requirement as set out in the University Policy on Admission: Coursework.

        Admission requirements

        4.(1) To be considered for admission to this course an applicant must have—

        (a) a Bachelor's degree, or an equivalent qualification, as recognised by UWA;

        and

        (b) the equivalent of a UWA weighted average mark of at least 50 per cent;

        and

        (c) successfully completed prior study in a field relevant to Urban Design; or

        (2) completed a Graduate Certificate in Urban Design at UWA.

        Admission ranking and selection

        5. Where relevant, admission will be awarded to the highest ranked applicants or applicants selected based on the relevant requirements.

        Articulations and exit awards

        6.(1) The following courses form part of an articulated sequence:

        • 25210 Graduate Certificate in Urban Design (24 points)
        • 25310 Graduate Diploma in Urban Design (48 points)
        • 25530 Master of Urban Design (96 points)

        (2) A student who withdraws from the Graduate Diploma in Urban Design course before completing it, but after fulfilling the requirements of a lesser award in the above sequence, may apply for the relevant award.

        Course structure

        7.(1) The course consists of units to a total value of 48 points.

        (2) Units must be selected in accordance with the course structure, as set out in these rules.

        Satisfactory progress

        8. To make satisfactory progress a student must pass units to a point value greater than half the total value of units in which they remain enrolled after the final date for withdrawal without academic penalty.

        9. A student who has not achieved a result of Ungraded Pass (UP) for the Communication and Research Skills module (the CARS module) when their progress status is assessed will not have made satisfactory progress even if they have met the other requirements for satisfactory progress in Rule 8.

        Progress status

        10.(1) Students who fail to make satisfactory progress under Rule 8 for the first time are assigned the progress status of 'Suspended' by the Faculty.

        (2) Students who fail to make satisfactory progress under Rule 8 for a second time are assigned the progress status of 'Excluded' by the Faculty.

        11. A student who does not make satisfactory progress in terms of Rule 9 is assigned the progress status of 'On Probation', unless they have been assigned a progress status of 'Suspended' or 'Excluded' for failure to meet other satisfactory progress requirements in Rule 8.

        Award with distinction

        12. This rule is not applicable to this course.

        Deferrals

        13. Applicants awarded admission to the course are entitled to a deferral of up to 12 months, as per the University Policy on: Admissions (Coursework).

        Additional rules
        Restriction on enrolment

        14. A student must not enrol in URBD5804 Urban Design Studio 1 and URBD5802 Urban Design Studio 2 in the same semester.

      • Master of Architecture (coursework or coursework and dissertation) (25520)
        Applicability of the Student Rules, policies and procedures

        1.(1) The Student Rules apply to students in this course.

        (2) The policy, policy statements and guidance documents and student procedures apply, except as otherwise indicated in the rules for this course.

        Academic Conduct Essentials and Communication and Research Skills modules

        2.(1) Except as stated in (2), a student who enrols in this course for the first time irrespective of whether they have previously been enrolled in another course of the University, must undertake the Academic Conduct Essentials module (the ACE module) and the Communication and Research Skills module (the CARS module).

        (2) A student who has previously achieved a result of Ungraded Pass (UP) for the CARS module is not required to repeat the module.

        (3) A student must successfully complete the ACE module within the first teaching period of their enrolment. Failure to complete the module within this timeframe will result in the student's unit results from this teaching period being withheld. These results will continue to be withheld until students avail themselves of a subsequent opportunity to achieve a passing grade in the ACE module. In the event that students complete units in subsequent teaching periods without completing the ACE module, these results will similarly be withheld. Students will not be permitted to submit late review or appeal applications regarding results which have been withheld for this reason and which they were unable to access in the normally permitted review period.

        English Language competency requirements

        3. To be considered eligible for consideration for admission to this course an applicant must satisfy the University's English language competence requirement as set out in the University Policy on Admission: Coursework.

        Admission requirements

        4. To be considered for admission to this course an applicant must have—

        (a) a bachelor's degree, or an equivalent qualification, as recognised by UWA;

        and

        (b) the equivalent of a UWA weighted average mark of at least 60 per cent.

        Admission ranking and selection

        5. Where relevant, admission will be awarded to the highest ranked applicants or applicants selected based on the relevant requirements.

        Articulations and exit awards

        6. This course does not form part of an articulated sequence.

        Course structure

        7.(1) The course consists of units to a total value of 168 points (maximum value) which includes conversion units to a value of 72 points, course core units and focus area units. The course comprises the following focus areas :

        • FA-BDIMD Building Information Modelling
        • FA-LNDSN Landscape Design
        • FA-SIDSN Social Impact Design
        • FA-UBDSN Urban Design

        (2) Units must be selected in accordance with the course structure, as set out in these rules.

        (3) Students who have completed a Bachelor of Arts with co-requisite majors in Architecture, or equivalent as recognised by the Faculty are granted credit for conversion units up to a value of 72 points.

        Satisfactory progress

        8. To make satisfactory progress a student must pass units to a point value greater than half the total value of units in which they remain enrolled after the final date for withdrawal without academic penalty.

        9. A student who has not achieved a result of Ungraded Pass (UP) for the Communication and Research Skills module (the CARS module) when their progress status is assessed will not have made satisfactory progress even if they have met the other requirements for satisfactory progress in Rule 8.

        Progress status

        10.(1) A student who makes satisfactory progress is assigned the status of 'Good Standing'.

        (2) Unless the Board of Examiners determines otherwise in light of exceptional circumstances—

        (a) a student who does not make satisfactory progress under Rule 8 for the first time is assigned a progress status of 'Suspended'; and

        (b) a student who does not make satisfactory progress under Rule 8 for the second time is assigned a progress status of 'Excluded'.

        11. A student who does not make satisfactory progress in terms of Rule 9 is assigned the progress status of 'On Probation', unless they have been assigned a progress status of 'Suspended' or 'Excluded' for failure to meet other satisfactory progress requirements in Rule 8.

        Award with distinction

        12. To be awarded the degree with distinction a student must achieve a course weighted average mark (WAM) of at least 80 per cent which is calculated based on—

        (a) all units above Level 3 attempted as part of the course that are awarded a final percentage mark;

        (b) all relevant units above Level 3 undertaken in articulating courses of this University that are awarded a final percentage mark;

        and

        (c) all units above Level 3 completed at this University that are credited to the master's degree course.

        Deferrals

        13. Applicants awarded admission to the course are entitled to a deferral of up to 12 months, as per the University Policy on: Admissions (Coursework).

        Additional rules
        Professional work experience

        14.(1) Before qualifying for the degree, a student must have completed either:

        a) WILG5001 Professional Development Practicum A in which placement of professional work experience is supported by the Faculty; or

        b) not less than 8 weeks of full-time, or the equivalent part-time, professional work experience considered appropriate by the Faculty.

        (2) Of the period of professional work experience required, students must complete at least 6 weeks full-time, or the part-time equivalent, under the supervision of a registered architect.

        (3) Students may undertake a maximum of two weeks of the professional work experience in an allied field which is considered appropriate by the Faculty.

        (4) If students undertake professional work experience overseas they must provide evidence that the person who supervised their work experience is a registered architect in the country in which the work experience was undertaken.

        (5) Students may make their own arrangements for professional work experience with advice from the Faculty and present this evidence as a recognition of prior work experience to exempt them from the core unit WILG5001.(6) Students who exempted from the core unit WILG5001 will be required to substitute an option unit in its place.

        (7) The Faculty may waive or vary the requirement for professional work experience if it is satisfied that the requirements cannot be met.

        Time limit

        15.(1) Unless the Faculty approves an extension, the time limit is seven years from the beginning of the semester in which the first unit is credited towards the course.

        [Approved exception to University Policy]

      • Master of Building Information Modelling (Online) (coursework) (25560)
        Applicability of the Student Rules, policies and procedures

        1.(1) The Student Rules apply to students in this course.

        (2) The policy, policy statements and guidance documents and student procedures apply, except as otherwise indicated in the rules for this course.

        Academic Conduct Essentials and Communication and Research Skills modules

        2.(1) Except as stated in (2), a student who enrols in this course for the first time irrespective of whether they have previously been enrolled in another course of the University, must undertake the Academic Conduct Essentials module (the ACE module).

        (2) A student who has previously achieved a result of Ungraded Pass (UP) for the ACE module is not required to repeat the module.

        English Language competency requirements

        3. To be considered eligible for consideration for admission to this course an applicant must satisfy the University's English language competence requirement as set out in the University Policy on Admission: Coursework.

        Admission requirements

        4.(1) To be considered for admission to this course an applicant must have—

        (a) a Bachelor's degree, or an equivalent qualification, as recognised by UWA;

        and

        (b) the equivalent of a UWA weighted average mark of at least 50 per cent;

        and

        (c) at least two years professional experience in a relevant occupation;

        and

        (d) successfully completed prior study in a field relevant to Building Information Modelling.

        OR

        (2) (a) a UWA graduate diploma which articulates with this course;

        and

        (b) the equivalent of a UWA weighted average mark of at least 60 per cent.

        Admission ranking and selection

        5. Where relevant, admission will be awarded to the highest ranked applicants or applicants selected based on the relevant requirements.

        Articulations and exit awards

        6.(1) The following courses form part of an articulated sequence:

        • 25340 Graduate Diploma in Building Information Modelling (24 points)
        • 25360 Graduate Diploma in Building Information Modelling (Online) (24 points)
        • 25560 Master of Building Information Modelling (Online) (48 points)

        (2) A student who withdraws from the Master of Building Information Modelling (Online) course before completing it, but after fulfilling the requirements of a lesser award in the above sequence, may apply for the relevant award.

        Course structure

        7.(1) The course consists of units to a total value of 48 points.

        (2) Units must be selected in accordance with the course structure, as set out in these rules.

        Satisfactory progress

        8. To make satisfactory progress a student must pass units to a point value greater than half the total value of units in which they remain enrolled after the final date for withdrawal without academic penalty.

        9. A student who has not achieved a result of Ungraded Pass (UP) for the Communication and Research Skills module (the CARS module) when their progress status is assessed will not have made satisfactory progress even if they have met the other requirements for satisfactory progress in Rule 8.

        Progress status

        10.(1) A student who makes satisfactory progress is assigned the status of 'Good Standing'.

        (2) Unless the relevant board determines otherwise because of exceptional circumstances—

        (a) a student who does not make satisfactory progress for the first time under Rule 8 is assigned a progress status of 'On Probation';

        (b) a student who does not make satisfactory progress for the second time under Rule 8 is assigned a progress status of 'Suspended';

        (c) a student who does not make satisfactory progress for the third time under Rule 8 is assigned a progress status of 'Excluded'

        11. A student who does not make satisfactory progress in terms of Rule 9 is assigned the progress status of 'On Probation', unless they have been assigned a progress status of 'Suspended' or 'Excluded' for failure to meet other satisfactory progress requirements in Rule 8.

        Award with distinction

        12. To be awarded the degree with distinction a student must achieve a course weighted average mark (WAM) of at least 80 per cent which is calculated based on—

        (a) all units above Level 3 attempted as part of the course that are awarded a final percentage mark;

        (b) all relevant units above Level 3 undertaken in articulating courses of this University that are awarded a final percentage mark;

        and

        (c) all units above Level 3 completed at this University that are credited to the master's degree course.

        Deferrals

        13. Applicants awarded admission to the course are entitled to a deferral of up to 12 months, as per the University Policy on: Admissions (Coursework).

      • Master of Building Information Modelling (coursework) (25540)
        Applicability of the Student Rules, policies and procedures

        1.(1) The Student Rules apply to students in this course.

        (2) The policy, policy statements and guidance documents and student procedures apply, except as otherwise indicated in the rules for this course.

        Academic Conduct Essentials and Communication and Research Skills modules

        2.(1) Except as stated in (2), a student who enrols in this course for the first time irrespective of whether they have previously been enrolled in another course of the University, must undertake the Academic Conduct Essentials module (the ACE module) and the Communication and Research Skills module (the CARS module).

        (2) A student who has previously achieved a result of Ungraded Pass (UP) for the CARS module is not required to repeat the module.

        (3) A student must successfully complete the ACE module within the first teaching period of their enrolment. Failure to complete the module within this timeframe will result in the student's unit results from this teaching period being withheld. These results will continue to be withheld until students avail themselves of a subsequent opportunity to achieve a passing grade in the ACE module. In the event that students complete units in subsequent teaching periods without completing the ACE module, these results will similarly be withheld. Students will not be permitted to submit late review or appeal applications regarding results which have been withheld for this reason and which they were unable to access in the normally permitted review period.

        English Language competency requirements

        3. To be considered eligible for consideration for admission to this course an applicant must satisfy the University's English language competence requirement as set out in the University Policy on Admission: Coursework.

        Admission requirements

        4.(1) To be considered for admission to this course an applicant must have—

        (a) a Bachelor's degree, or an equivalent qualification, as recognised by UWA;

        and

        (b) the equivalent of a UWA weighted average mark of at least 50 per cent;

        and

        (c) at least two years professional experience in a relevant occupation;

        and

        (d) successfully completed prior study in a field relevant to Building Information Modelling.

        OR

        (2) (a) a UWA graduate diploma which articulates with this course;

        and

        (b) the equivalent of a UWA weighted average mark of at least 60 per cent.

        Admission ranking and selection

        5. Where relevant, admission will be awarded to the highest ranked applicants or applicants selected based on the relevant requirements.

        Articulations and exit awards

        6.(1) The following courses form part of an articulated sequence:

        • 25340 Graduate Diploma in Building Information Modelling (24 points)
        • 25360 Graduate Diploma in Building Information Modelling (Online) (24 points)
        • 25540 Master of Building Information Modelling (48 points)

        (2) A student who withdraws from the Master of Building Information Modelling course before completing it, but after fulfilling the requirements of a lesser award in the above sequence, may apply for the relevant award.

        Course structure

        7.(1) The course consists of units to a total value of 48 points.

        (2) Units must be selected in accordance with the course structure, as set out in these rules.

        Satisfactory progress

        8. To make satisfactory progress a student must pass units to a point value greater than half the total value of units in which they remain enrolled after the final date for withdrawal without academic penalty.

        9. A student who has not achieved a result of Ungraded Pass (UP) for the Communication and Research Skills module (the CARS module) when their progress status is assessed will not have made satisfactory progress even if they have met the other requirements for satisfactory progress in Rule 8.

        Progress status

        10.(1) A student who makes satisfactory progress is assigned the status of 'Good Standing'.

        (2) Unless the relevant board determines otherwise because of exceptional circumstances—

        (a) a student who does not make satisfactory progress for the first time under Rule 8 is assigned a progress status of 'On Probation';

        (b) a student who does not make satisfactory progress for the second time under Rule 8 is assigned a progress status of 'Suspended';

        (c) a student who does not make satisfactory progress for the third time under Rule 8 is assigned a progress status of 'Excluded'

        11. A student who does not make satisfactory progress in terms of Rule 9 is assigned the progress status of 'On Probation', unless they have been assigned a progress status of 'Suspended' or 'Excluded' for failure to meet other satisfactory progress requirements in Rule 8.

        Award with distinction

        12. To be awarded the degree with distinction a student must achieve a course weighted average mark (WAM) of at least 80 per cent which is calculated based on—

        (a) all units above Level 3 attempted as part of the course that are awarded a final percentage mark;

        (b) all relevant units above Level 3 undertaken in articulating courses of this University that are awarded a final percentage mark;

        and

        (c) all units above Level 3 completed at this University that are credited to the master's degree course.

        Deferrals

        13. Applicants awarded admission to the course are entitled to a deferral of up to 12 months, as per the University Policy on: Admissions (Coursework).

      • Master of Landscape Architecture (coursework or coursework and dissertation) (25550)
        Applicability of the Student Rules, policies and procedures

        1.(1) The Student Rules apply to students in this course.

        (2) The policy, policy statements and guidance documents and student procedures apply, except as otherwise indicated in the rules for this course.

        Academic Conduct Essentials and Communication and Research Skills modules

        2.(1) Except as stated in (2), a student who enrols in this course for the first time irrespective of whether they have previously been enrolled in another course of the University, must undertake the Academic Conduct Essentials module (the ACE module) and the Communication and Research Skills module (the CARS module).

        (2) A student who has previously achieved a result of Ungraded Pass (UP) for the CARS module is not required to repeat the module.

        (3) A student must successfully complete the ACE module within the first teaching period of their enrolment. Failure to complete the module within this timeframe will result in the student's unit results from this teaching period being withheld. These results will continue to be withheld until students avail themselves of a subsequent opportunity to achieve a passing grade in the ACE module. In the event that students complete units in subsequent teaching periods without completing the ACE module, these results will similarly be withheld. Students will not be permitted to submit late review or appeal applications regarding results which have been withheld for this reason and which they were unable to access in the normally permitted review period.

        English Language competency requirements

        3. To be considered eligible for consideration for admission to this course an applicant must satisfy the University's English language competence requirement as set out in the University Policy on Admission: Coursework.

        Admission requirements

        4. To be considered for admission to this course an applicant must have—

        (a) a bachelor's degree, or an equivalent qualification, as recognised by UWA;

        and

        (b) the equivalent of a UWA weighted average mark of at least 60 per cent.

        Admission ranking and selection

        5. Where relevant, admission will be awarded to the highest ranked applicants or applicants selected based on the relevant requirements.

        Articulations and exit awards

        6. This course does not form part of an articulated sequence.

        Course structure

        7.(1) The course consists of units to a total value of 144 points (maximum value) which includes conversion units to a value of 48 points, course core units and focus area units. The course comprises the following focus areas :

        • FA-ENVPL Environmental Planning
        • FA-UBDSN Urban Design

        (2) Units must be selected in accordance with the course structure, as set out in these rules.

        (3) Students who have completed a bachelor's degree with a major in Landscape Architecture, or equivalent as recognised by the Faculty, are granted credit for conversion units up to a value of 48 points.

        Satisfactory progress

        8. To make satisfactory progress a student must pass units to a point value greater than half the total value of units in which they remain enrolled after the final date for withdrawal without academic penalty.

        9. A student who has not achieved a result of Ungraded Pass (UP) for the Communication and Research Skills module (the CARS module) when their progress status is assessed will not have made satisfactory progress even if they have met the other requirements for satisfactory progress in Rule 8.

        Progress status

        10.(1) Students who fail to make satisfactory progress under Rule 8 for the first time are assigned the progress status of 'Suspended' by the Faculty.

        (2) Students who fail to make satisfactory progress under Rule 8 for a second time are assigned the progress status of 'Excluded' by the Faculty.

        11. A student who does not make satisfactory progress in terms of Rule 9 is assigned the progress status of 'On Probation', unless they have been assigned a progress status of 'Suspended' or 'Excluded' for failure to meet other satisfactory progress requirements in Rule 8.

        Award with distinction

        12. To be awarded the degree with distinction a student must achieve a course weighted average mark (WAM) of at least 80 per cent which is calculated based on—

        (a) all units above Level 3 attempted as part of the course that are awarded a final percentage mark;

        (b) all relevant units above Level 3 undertaken in articulating courses of this University that are awarded a final percentage mark;

        and

        (c) all units above Level 3 completed at this University that are credited to the master's degree course.

        Deferrals

        13. Applicants awarded admission to the course are entitled to a deferral of up to 12 months, as per the University Policy on: Admissions (Coursework).

        Additional rules
        Time limit

        14. Unless the Faculty approves an extension, the time limit is six years from the beginning of the semester in which the first unit is credited towards the course.

      • Master of Urban Design (coursework or coursework and dissertation) (25530)
        Applicability of the Student Rules, policies and procedures

        1.(1) The Student Rules apply to students in this course.

        (2) The policy, policy statements and guidance documents and student procedures apply, except as otherwise indicated in the rules for this course.

        Academic Conduct Essentials and Communication and Research Skills modules

        2.(1) Except as stated in (2), a student who enrols in this course for the first time irrespective of whether they have previously been enrolled in another course of the University, must undertake the Academic Conduct Essentials module (the ACE module) and the Communication and Research Skills module (the CARS module).

        (2) A student who has previously achieved a result of Ungraded Pass (UP) for the CARS module is not required to repeat the module.

        (3) A student must successfully complete the ACE module within the first teaching period of their enrolment. Failure to complete the module within this timeframe will result in the student's unit results from this teaching period being withheld. These results will continue to be withheld until students avail themselves of a subsequent opportunity to achieve a passing grade in the ACE module. In the event that students complete units in subsequent teaching periods without completing the ACE module, these results will similarly be withheld. Students will not be permitted to submit late review or appeal applications regarding results which have been withheld for this reason and which they were unable to access in the normally permitted review period.

        English Language competency requirements

        3. To be considered eligible for consideration for admission to this course an applicant must satisfy the University's English language competence requirement as set out in the University Policy on Admission: Coursework.

        Admission requirements

        4.(1) To be considered for admission to this course an applicant must have—

        (a) a Bachelor's degree, or an equivalent qualification, as recognised by UWA;

        and

        (b) the equivalent of a UWA weighted average mark of at least 50 per cent;

        and

        (c) successfully completed prior study in a field relevant to Urban Design; or

        (2) completed a Graduate Certificate in Urban Design or Graduate Diploma in Urban Design at UWA.

        Admission ranking and selection

        5. Where relevant, admission will be awarded to the highest ranked applicants or applicants selected based on the relevant requirements.

        Articulations and exit awards

        6.(1) The following courses form part of an articulated sequence:

        • 25210 Graduate Certificate in Urban Design (24 points)
        • 25310 Graduate Diploma in Urban Design (48 points)
        • 25530 Master of Urban Design (96 points)

        (2) A student who withdraws from the Master of Urban Design course before completing it, but after fulfilling the requirements of a lesser award in the above sequence, may apply for the relevant award.

        Course structure

        7.(1) The course consists of units to a total value of 96 points which must include course core units and focus area units. The course comprises the following focus areas:

        • FA-ENVPL Environmental Planning
        • FA-LDARC Landscape Design
        • FA-URPLN Urban and Regional Planning

        (2) Units must be selected in accordance with the course structure, as set out in these rules.

        Satisfactory progress

        8. To make satisfactory progress a student must pass units to a point value greater than half the total value of units in which they remain enrolled after the final date for withdrawal without academic penalty.

        9. A student who has not achieved a result of Ungraded Pass (UP) for the Communication and Research Skills module (the CARS module) when their progress status is assessed will not have made satisfactory progress even if they have met the other requirements for satisfactory progress in Rule 8.

        Progress status

        10.(1) Students who fail to make satisfactory progress under Rule 8 for the first time are assigned the progress status of 'Suspended' by the Faculty.

        (2) Students who fail to make satisfactory progress under Rule 8 for a second time are assigned the progress status of 'Excluded' by the Faculty.

        11. A student who does not make satisfactory progress in terms of Rule 9 is assigned the progress status of 'On Probation', unless they have been assigned a progress status of 'Suspended' or 'Excluded' for failure to meet other satisfactory progress requirements in Rule 8.

        Award with distinction

        12. To be awarded the degree with distinction a student must achieve a course weighted average mark (WAM) of at least 80 per cent which is calculated based on—

        (a) all units above Level 3 attempted as part of the course that are awarded a final percentage mark;

        (b) all relevant units above Level 3 undertaken in articulating courses of this University that are awarded a final percentage mark;

        and

        (c) all units above Level 3 completed at this University that are credited to the master's degree course.

        Deferrals

        13. Applicants awarded admission to the course are entitled to a deferral of up to 12 months, as per the University Policy on: Admissions (Coursework).

        Additional rules
        Restriction on enrolment

        14. A student must not enrol in URBD5804 Urban Design Studio 1 and URBD5802 Urban Design Studio 2 in the same semester.

      • Digital Creativity (CU016)
        Title

        1. These rules are the Digital Creativity Course Rules.

        Terms Used

        2. The Glossary provides an explanation of the terms used in these rules.

        Applicability of the Student Rules, policies and procedures

        3.(1) The Student Rules apply to students in this course.

        (2) The policy, policy statements and guidance documents and student procedures apply, except as otherwise indicated in the rules for this course.

        Academic Conduct Essentials, Communication and Research Skills And Indigenous Studies Essentials module

        4.(1) Except as stated in (2), a student who enrols in an undergraduate degree course of the University for the first time irrespective of whether they have previously been enrolled in another course of the University, must undertake the Academic Conduct Essentials module (the ACE module), Communication and Research Skills (the CARS module) and Indigenous Studies Essentials (the ISE module) in the teaching period in which they are first enrolled.

        (2) A student must successfully complete the ACE module within the first teaching period of their enrolment. Failure to complete the module within this timeframe will result in the student's unit results from this teaching period being withheld. These results will continue to be withheld until students avail themselves of a subsequent opportunity to achieve a passing grade in the ACE module. In the event that students complete units in subsequent teaching periods without completing the ACE module, these results will similarly be withheld. Students will not be permitted to submit late review or appeal applications regarding results which have been withheld for this reason and which they were unable to access in the normally permitted review period.

        (3) A student who has previously achieved a result of Ungraded Pass (UP) for the CARS module or the ISE module is not required to repeat the relevant module.

        Course structure

        Satisfactory progress

        Progress status

        Deferrals

        12. Applicants are not permitted to defer admission to this course and are expected to commence their course in the offered intake only. Applicants seeking admission to an alternative intake must submit a new application for that intake.

      • Curatorial Studies (CU017)

        Note: This course is not available in 2022.

        Title

        1. These rules are the Curatorial Studies Course Rules.

        Terms Used

        2. The Glossary provides an explanation of the terms used in these rules.

        Applicability of the Student Rules, policies and procedures

        3.(1) The Student Rules apply to students in this course.

        (2) The policy, policy statements and guidance documents and student procedures apply, except as otherwise indicated in the rules for this course.

        Academic Conduct Essentials, Communication and Research Skills And Indigenous Studies Essentials module

        4.(1) Except as stated in (2), a student who enrols in an undergraduate degree course of the University for the first time irrespective of whether they have previously been enrolled in another course of the University, must undertake the Academic Conduct Essentials module (the ACE module), Communication and Research Skills (the CARS module) and Indigenous Studies Essentials (the ISE module) in the teaching period in which they are first enrolled.

        (2) A student must successfully complete the ACE module within the first teaching period of their enrolment. Failure to complete the module within this timeframe will result in the student's unit results from this teaching period being withheld. These results will continue to be withheld until students avail themselves of a subsequent opportunity to achieve a passing grade in the ACE module. In the event that students complete units in subsequent teaching periods without completing the ACE module, these results will similarly be withheld. Students will not be permitted to submit late review or appeal applications regarding results which have been withheld for this reason and which they were unable to access in the normally permitted review period.

        (3) A student who has previously achieved a result of Ungraded Pass (UP) for the CARS module or the ISE module is not required to repeat the relevant module.

        Course structure

        Satisfactory progress

        Progress status

        Deferrals

        12. Applicants are not permitted to defer admission to this course and are expected to commence their course in the offered intake only. Applicants seeking admission to an alternative intake must submit a new application for that intake.